Ethernet Based Clock

Product Description

Having keen market understanding and vast experience in this field, we are engaged in manufacturing and supplying Ethernet Based Clock. It can display the same, accurate, legal time. This commercial digital clock is specifically designed for applications where precision and reliability are of utmost importance. The clock has it's time synchronized through an Ethernet connection to a master time. Each Ethernet Based Clock can be assigned individual IP address. We offer this clock at cost effective prices to clients. 

Features:

Ethernet Based Clock

This system is designed with a latest technology having a TCP-IP communication facility. In this system, your existing LAN Network will be utilized for time synchronizing. PC will be connected to your existing LAN network through LAN switch & Dynatek Time Software will be loaded to PC now this PC acts as a Master  & communicates “ PC TIME” to all the clocks connected in LAN network. Hence there is no need of a separate Master Clock. Master PC will be provided with GPS receiver(optional) to synchronize GPS TIME. There is no need to keep the PC continuously “ON”, because each slave clock is provided with RTC hence it works as a standalone clock, therefore even though a PC is not in operation for 1 or 2 days all the clocks will show uniform time.

Advantages of TCP-IP Communication facility:-       Existing LAN network can be used for uniform time synchronization. There is no need of huge Cabling work. Any no. of clocks can be connected. Network connectivity Status can be checked through PC. Installation & maintenance cost is very low as compare to conventional clock    system. Time synchronizing software can be loaded to any working PC in LAN Network There is no need to keep PC continuously “ON”. Any Converter for PC communication is not required. Each Clock can be assigned individual IP address. GMT offset is settable. Day light saving mode. GPS receiver connectivity.   ETHERNET BASED SYNCHRONIZE DIGITAL CLOCK SYSTEM

Sizes  for clock : 2.3 inch ( 315  X 115  X 60 mm )   4 inch ( 480 X 185  X 65 mm )   6 inch ( 575 X 250 X 80 mm )   8 inch ( 750 X 320 X 80 mm )   10 inch  ( 950 X 400 X90  mm )            Model : NET :          NETWORK CLOCK   RS   :          RS 485 BUS   SP   :          SYNC  PULSE ( 3 WIRE)     Mounting Type : W  = WALL   SW = SIDE WALL   R    =  ROOF     Display Type : SG = 7 SEGMENT   LE = LED TYPE       SS = SINGLE SIDE / BB = BACK TO BACK